doi:
UDK: 669
EFFECT OF TEMPERING ON THE STRUCTURE AND PROPERTIES OF BAINITIC-MARTENSITIC STEEL AFTER HARDENING
Мишуринская Е. В.
Article language: английский
Annotation
The work is devoted to the study of the relationship between the structure and mechanical properties depending on the modes of plastic deformation and heat treatment of rolled sheets made of low-carbon low-alloy steel. The modeling of rolling and heat treatment modes of steel grade 09KHN2MD on the «Gleeble 3800» plastometer was carried out, as well as the regularities of the formation of structures with varying tempering and tempering temperatures for the selection of industrial modes were established. The main tasks include laboratory studies with varying rolling and heat treatment modes on the DIL 805 dilatometer and on the Gleeble 3800 plastometer, the study of the structure of steel after various processing modes, the study of changes in mechanical properties (microhardness) and structure after quenching and tempering on the Gleeble 3800 plastometer, conducting studies of the structure and properties of prototypes after quenching and tempering in laboratory conditions, development of recommendations for industrial testing and conducting studies of the structure and properties of sheet metal after quenching and tempering in industrial conditions. Based on the studies carried out, recommendations have been developed for the selection of technological schemes for the manufacture of sheet metal with a thickness of 15 mm based on the same chemical composition, but having a different strength category.
Keywords: modeling on a Gleeble-3800 plastometer, low-carbon chromium-nickel-molybdenum steel, rolling, quenching and tempering, structure, mechanical properties
Bibliography
Рыбин В.В., Малышевский В.А., Хлусова Е.И. Высокопрочные свариваемые улучшаемые стали - СПб.: Изд-во Политехн. ун-та, 2016. - 212 с
Ковальчук М.В., Орыщенко А.С., Малышевский В.А., Петров С.Н., Шумилов Е.А. К вопросу об унификации химического состава высокопрочных сталей для судостроения // Вопросы материаловедения - №1 - 2018 г. - с.7-14, DOI 10.22349/1994-6716-2018-93-1-07-14
Голосиенко С.А., Мотовилина Г.Д., Хлусова Е.И. Влияние структуры, сформированной при закалке, на свойства высокопрочной хладостойкой стали после отпуска // Вопросы материаловедения - №1 - 2008 г. - с. 32-44
Голубева М.В., Сыч О.В., Хлусова Е.И. и др. Изменение структуры высокопрочной экономлегированной стали марки 09ХГН2МД при отпуске // Вопросы материаловедения - №1 - 2018 г. - с.15-26, DOI 10.22349/1994-6716-2018-93-1-15-26
Голубева М.В. Хладостойкая свариваемая сталь класса прочности 690 МПа для тяжелонагруженной техники // Автореферат, кандидатская диссертация, г. Санкт-Петербург - 2019 г. - с.12-14
Горынин И.В. Конструкционные стали для судостроения, Судостроение - №5 - 2009 г. - с. 14-19
Клейнер Л.М., Ларинин Д.М., Шацов А.А. Наноструктурированный низкоуглеродистый реечный мартенсит - основа высокой конструкционной прочности сталей // Материаловедение - №8 - 2013 г. - с. 32-35
Yu C., Yang T.C., Huang C.Y., Shiue R.K. Low-Temperature toughness of the austempered o shore steel // The material, metals and materials society - 2016, pp. 77-83